+-- Cabinet 0 ----------------+
 |                             |
 | Cell 0 (CPU, Memory)        |
 | Cell 1 (CPU, Memory)        |
 | Cell 2 (CPU, Memory)        |
 | Cell 3 (CPU, Memory)        |
 |                             |
 | I/O Chassis 0 (Netowrk, FC) |
 | I/O Chassis 1 (Netowrk, FC) |
 |                             |
 +-----------------------------+

 nPartition 0 : HP-UX 1
     Cell 0 (CPU, Memory)
     Cell 1 (CPU, Memory)
     I/O Chassis 0 (Netowrk, FC)

 nPartition 1 : HP-UX 2
     Cell 2 (CPU, Memory)
     Cell 3 (CPU, Memory)
     I/O Chassis 1 (Netowrk, FC)

• The PS command enables to check the status of the cabinet, system backplane, MP core I/O, PCI power domains—or bricks—in the I/O card cage, and cells.
• http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01084747&sp4ts.oid=447687

PS : Display the status of the power

[test-server-1] MP> CM

[test-server-1] MP:CM> ps

PC : Remote power control

[test-server-1] MP> CM

[test-server-1] MP:CM> pc

This command controls power enable to a hardware device.

    B - Cabinet
    C - Cell
    X - Complex
    I - IO Chassis
    P - Partition
        Select Device: p

#   Name
    ---  ----
     0)  Partition 0
     1)  Partition 1
     2)  Partition 2

    Select a partition number: 2

    The power state is ON for partition 2.
    In what state do you want the power? (ON/OFF) on

• Use the MP Command menu PE command to power off the hardware component.
• Using the PE command, the user can power on or off the cabinet (including all cells and I/O in the cabinet)
• http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01084747&sp4ts.oid=447687

PE - Power Entity: Allows the user to switch the power ON or OFF to a cabinet, cell or an I/O chassis. B-CABINET, C-CELL, I-HIOB.

[mp] MP> CM                                                                <- Command Menu

[mp] MP:CM> PE

This command controls power enable to a hardware device.

    T - Cabinet
    C - Cell
    P - IO Chassis
    R - Partition
        Select Device: T

    The power state is ON for Cabinet 0.
    In what state do you want the power? (ON/OFF) OFF
[mp] MP:CM>