Table of Contents

Juniper ScreenOS CLI Commands(SSG/NetScreen) [Old Device]

Initical Setting


Table of Contents


Initical Settings

For until http login

set admin password "netscreen"
set admin http redirect
set interface ethernet0/0 ip 192.168.0.3 255.255.255.0
set interface ethernet0/1 dhcp-client enable
set interface ethernet0/2 ip 203.xxx.xxx.xxx 255.255.255.252
set interface ethernet0/2 gateway 203.xxx.xxx.xxx
set interface vlan1 manage
save

NIC Negotiation

set interface "ethernet0/0" phy full 100mb
set interface "ethernet0/2" phy full 100mb
set interface "ethernet0/3" phy full 100mb

## check
get interface ethernet0/0
get interface ethernet0/2
get interface ethernet0/3
save

Setting Trust and Untrust

get interface   <- check
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/2" zone "Trust" 
get interface   <- check
save


Memo

set interface "ethernet0/0" phy full 100mb
set interface "ethernet0/2" phy full 100mb
set interface "ethernet0/3" phy full 100mb

set interface "ethernet0/3" phy full 10mb
set interface "ethernet0/3" phy auto