cmdref.net - Command Reference

This site is command references for system engineers.

User Tools

Site Tools


Top     SiteMap

Sidebar

Top     SiteMap








Etc


Reference











.

os:vyos:index.html



VyOS

About

Which Image do you use?

I recommend use the amd64.

Virtual (VMware, KVM, Xen, Hyper-V)amd64
i586-virt(drivers and tools included. 32bit)
Phisical Server 64bit amd64
Phisical Server 32bit i586


Commands

OperationCommnad
show configuration show
cahnge configuration mode configure
save configuration commit
save
IP Setting set interfaces ethernet eth0 address 192.168.0.1/24
Using SSH set service ssh
TimeZone set system time-zone 'Asia/Tokyo'

NTP

del system ntp server
set system ntp server '192.168.11.5'

DNS

del system name-server

set system name-server '10.254.174.10'
set system name-server '192.168.11.5'
set system domain-search domain 'ngy.local'

NAT

192.168.100.50 → 172.16.0.10

set nat destination rule 1 destination address 192.168.100.50
set nat destination rule 1 translation address 172.16.0.10
set nat destination rule 1 inbound-interface eth0

192.168.100.0/24 → 172.16.0.254

set nat source rule 1 source address 192.168.100.0/24
set nat source rule 1 translation address 172.16.0.254
set nat source rule 1 outbound-interface eth1
delete nat destination rule 1
delete nat source rule 1

SNAT

set nat source rule 100 outbound-interface 'eth0'
set nat source rule 100 source address '192.168.11.0/24'
set nat source rule 100 translation address masquerade

Port foward

192.168.64.150 port 80 → 172.16.0.10

set nat destination rule 1 destination address 192.168.64.150
set nat destination rule 1 destination port 80
set nat destination rule 1 inbound-interface eth0
set nat destination rule 1 protocol tcp
set nat destination rule 1 translation address 172.16.0.10

xx.xx.xx.xx port 10022 → 192.168.100.50 port 22

set nat destination rule 10 description 'Port Forward: SSH to 192.168.11.120'
set nat destination rule 10 destination port '10022'
set nat destination rule 10 inbound-interface 'eth0'
set nat destination rule 10 protocol 'tcp'
set nat destination rule 10 translation address '192.168.100.50'
set nat destination rule 10 translation port '22'

DHCP

set service dhcp-server shared-network-name dhcp1 subnet 192.168.100.0/24 start 192.168.100.11 stop 192.168.100.20
set service dhcp-server shared-network-name dhcp1 subnet 192.168.100.0/24 default-router 192.168.100.1
set service dhcp-server shared-network-name dhcp1 subnet 192.168.100.0/24 dns-server 192.168.100.2



os/vyos/index.html.txt · Last modified: 2017/09/11 by admin